|Anonymous | Login||2020-12-05 03:00 UTC|
|Main | My View | View Issues | Change Log | Docs|
|Viewing Issue Simple Details|
|ID||Category||Severity||Type||Date Submitted||Last Update|
|0000732||[1003.1(2008)/Issue 7] Base Definitions and Headers||Objection||Enhancement Request||2013-08-11 16:21||2013-08-15 14:43|
|Line Number||13067, 13083-13092|
|Final Accepted Text|
|Summary||0000732: Change parameter description of S_IS_XXX macros?|
The S_ISBLK, etc. macros specify that their parameter shall be from st_mode. However, all the symbolic flag values corresponding to valid inputs are marked XSI.
This implies it is only required of XSI systems that these bits be stored as part of st_mode, as the definition of mode_t in sys/types.h does not require this also.
A basic POSIX system might store type values in another implementation-specific field and not as part of st_mode, in other words, such as st_ftype that helps make its processing of type data more efficient.
As to line 13067 it doesn't have radix specified for Numeric Value header. Octal is implied by the leading zeros, and that is how they are labeled in
other parts, but it could be read as hex also just looking here, leaving hex 8
values as implied place to put an implementation-specific extra permissions bit
and keep it grouped with others. I'd hope no one reads them as decimal. :-)
1) Shade the block 13083-13092 XSI.
2) Unshade the block starting at 13054.
3) Add language to the definition of mode_t type that it is required to hold as file attributes both file type and file permission bits as defined elsewhere.
4) Replace the paragraph at line 13083 with:
[CX] The implementation may define the identifier ST_FTYPE as a macro
that shall expand to the text of the identifier of a field of the stat
structure, as the implementation defines it, such that it may be used as
a ".ST_FTYPE" or "->ST_FTYPE" reference construct to generically represent
which stat field holds the bits representing file type as the parameter m
to the following test macros. [CX]
[XSI] On XSI conformant systems this macro, if defined, shall reference
the st_mode field, e.g.
#define ST_FTYPE st_mode
to be compatible with the type mask values defined above. [XSI]
[CX] A conforming application shall test for the presence of ST_FTYPE
via #if before it uses it with any of the following macros. If it is
not present they shall use a reference to the st_mode field directly
as the parameter m for backwards compatibility purposes. [CX]
The following macros shall be provided to test whether a file is of
the specified type. The macro shall evaluate to a non-zero value if
the test is true; 0 if the test is false. The parameter m supplied to
the macros is the value of the field from a stat structure within
which bit flags representing these file types are stored. [CX] The
ST_FTYPE macro, when defined, may be used to construct references to
this value. It is implementation-defined when XSI conformance is not
claimed whether type mask identifiers are provided. [CX]
I believe Option 4 is both backwards compatible while still leaving smaller
systems, and much larger, the option of using another field, and provides a
place an implementer can hook onto for supporting some extensions to the file
system and let current apps be forward compatible too. This allows a uchar to
hold type and a short int for attributes, rather than a long int that holds
both, at least for now.
5) Add "(Octal)", or "(In Hex)", to Numeric Value field, or "*" with "* All
values in octal." footnote below table.
|Tags||No tags attached.|
|There are no notes attached to this issue.|
|2013-08-11 16:21||shware_systems||New Issue|
|2013-08-11 16:21||shware_systems||Status||New => Under Review|
|2013-08-11 16:21||shware_systems||Assigned To||=> ajosey|
|2013-08-11 16:21||shware_systems||Name||=> Mark Ziegast|
|2013-08-11 16:21||shware_systems||Organization||=> SHware Systems|
|2013-08-11 16:21||shware_systems||Section||=> c082.pdf sys/stat.h|
|2013-08-11 16:21||shware_systems||Page Number||=> 389|
|2013-08-11 16:21||shware_systems||Line Number||=> 13067, 13083-13092|
|2013-08-15 14:43||geoffclare||Project||2008-TC1 => 1003.1(2008)/Issue 7|
|2014-04-24 15:25||eblake||Relationship added||related to 0000834|
|Mantis 1.1.6[^] Copyright © 2000 - 2008 Mantis Group|